High-Quality Affordable Design
To prevent poor bass performance in demanding situations, such as heavy bass content or dynamic range music, Pioneer designed a high-quality power supply to sustain constant power requirements. This design enhances audio performance by providing a better signal-to-noise ratio, improved audio dynamics, sustained bass when needed, and, most importantly, a more enjoyable ride in your car!
Automatic Signal sensing and Turn-On
When used with an audio source such as an OEM source or a receiver without RCA output, the amplifier will activate as soon as an audio source is detected through the speaker level outputs. When using a pre-amplified source (RCA), this Pioneer amplifier will use the signal (+12Vdc) from the "Remote" input for activation.
Built-in Filter
The amplifier features a switchable 80 Hz low-pass filter (LPF) to precisely adjust the audio bandwidth and optimize the acoustic performance of your subwoofer.
AMP FEATURES | |
---|---|
Bridgable
Yes
|
Class
A/B
|
Grounding System
Negative
|
Power Source
14.4V (10.8 V to 15.1 V allowable)
|
Protection Control system
Yes
|
Terminal Type
Screw
|
Unit Weight
3.1 lbs
|
AMP FEATURES |
---|
Bridgable
Yes
|
Class
A/B
|
Grounding System
Negative
|
Power Source
14.4V (10.8 V to 15.1 V allowable)
|
Protection Control system
Yes
|
Terminal Type
Screw
|
Unit Weight
3.1 lbs
|
PRODUCT PERFORMANCE | |
---|---|
Allowable Load Impedance
2 ohm to 8 ohm allowable
|
Avg Current Consumption (amps x #ch)
4 A x 2-Channel - 4 Ohm,6.5 A x 1-Channel - 4 Ohm
|
Continuous-Power-Output
50 W x 2-Channel - 4 Ohm,95 W x 2-Channel - 2 Ohm,190 W x 1-Channel - 4 Ohm Bridged
|
Crossover Network Channel
LPF - A CH 80Hz
|
Crossover Network Channel Slope
-12db/oct (A/B CH)
|
Frequency Response Channel
10Hz to 70kHz (+0dB,-3dB) A/B Ch
|
Fuse Rating
25 A
|
Maximum Power Output
170 W x 2-Channel (4 Ohm),250 W x 2-Channel (2 Ohm),520 W (4 Ohm Bridged)
|
RCA Inputs
2-Channel
|
Signal to Noise
78 dBA (Reference: 1 W into 4 ohm)
|
Speaker Line input Sensor
Yes
|
PRODUCT PERFORMANCE |
---|
Allowable Load Impedance
2 ohm to 8 ohm allowable
|
Avg Current Consumption (amps x #ch)
4 A x 2-Channel - 4 Ohm,6.5 A x 1-Channel - 4 Ohm
|
Continuous-Power-Output
50 W x 2-Channel - 4 Ohm,95 W x 2-Channel - 2 Ohm,190 W x 1-Channel - 4 Ohm Bridged
|
Crossover Network Channel
LPF - A CH 80Hz
|
Crossover Network Channel Slope
-12db/oct (A/B CH)
|
Frequency Response Channel
10Hz to 70kHz (+0dB,-3dB) A/B Ch
|
Fuse Rating
25 A
|
Maximum Power Output
170 W x 2-Channel (4 Ohm),250 W x 2-Channel (2 Ohm),520 W (4 Ohm Bridged)
|
RCA Inputs
2-Channel
|
Signal to Noise
78 dBA (Reference: 1 W into 4 ohm)
|
Speaker Line input Sensor
Yes
|