High-Quality Affordable Design
To prevent poor bass performance in demanding situations, such as heavy bass content or dynamic range music, Pioneer designed a high-quality power supply to sustain constant power requirements. This design enhances audio performance by providing a better signal-to-noise ratio, improved audio dynamics, sustained bass when needed, and, most importantly, a more enjoyable ride in your car!
Automatic Signal sensing and Turn-On
When used with an audio source such as an OEM source or a receiver without RCA output, the amplifier will activate as soon as an audio source is detected through the speaker level outputs. When using a pre-amplified source (RCA), this Pioneer amplifier will use the signal (+12Vdc) from the "Remote" input for activation.
Variable Filter (Channel A)
The amplifier's "A" outputs feature a variable high-pass filter (HPF) ranging from 40 Hz to 500 Hz, or a fixed low-pass filter (LPF) at 80 Hz, to precisely adjust the audio bandwidth and optimize the acoustic performance of your speakers and/or subwoofer. These channels are ideal for your front speakers or for bass when the amplifier is used in 2-channel mode with two subwoofers.
Variable Filter (Channel B)
The amplifier's "B" outputs feature a high-pass filter (HPF) or low-pass filter (LPF) set at 80 Hz to eliminate low frequencies from your full-range speakers or high frequencies from your subwoofer, providing a more natural and pleasant acoustic performance. These channels are ideal for your rear speakers or a subwoofer when the amplifier is used in 3-channel mode.
AMP FEATURES | |
---|---|
Bridgable
Yes
|
Class
A/B
|
Grounding System
Negative
|
Power Source
14.4V (10.8 V to 15.1 V allowable)
|
Protection Control system
Yes
|
Terminal Type
Screw
|
Unit Weight
4.4 lbs
|
AMP FEATURES |
---|
Bridgable
Yes
|
Class
A/B
|
Grounding System
Negative
|
Power Source
14.4V (10.8 V to 15.1 V allowable)
|
Protection Control system
Yes
|
Terminal Type
Screw
|
Unit Weight
4.4 lbs
|
PRODUCT PERFORMANCE | |
---|---|
Allowable Load Impedance
2 ohm to 8 ohm allowable
|
Avg Current Consumption (amps x #ch)
5.5 A x 4-Channel - 4 Ohm,8.5 A x 2-Channel - 4 Ohm
|
Continuous-Power-Output
40 W x 4-Channel - 4 Ohm,65 W x 4-Channel - 2 Ohm,130 W x 2-Channel - 4 Ohm Bridged
|
Crossover Network Channel
LPF - A/B Ch - 80 Hz,HPF - A Ch - 40 Hz to 500Hz,HPF - B Ch - 80Hz
|
Crossover Network Channel Slope
-12db/oct (A/B CH)
|
Crossover Network Subwoofer Channel
LPF - 80 Hz
|
Crossover Network Subwoofer Slope
-12db/oct (A/B CH)
|
Frequency Response Channel
10Hz to 70kHz (+0dB,-3dB) A/B Ch
|
Frequency Response - Sub Channel
10Hz to 70kHz (+0dB,-3dB)
|
Fuse Rating
30 A x 1
|
Maximum Power Output
80 W x 4-Channel (4 Ohm),130 W x 4-Channel (2 Ohm),520 W (4 Ohm Bridged)
|
RCA Inputs
4-Channel
|
Signal to Noise
78 dBA (Reference: 1 W into 4 ohm)
|
Speaker Line input Sensor
Yes
|
PRODUCT PERFORMANCE |
---|
Allowable Load Impedance
2 ohm to 8 ohm allowable
|
Avg Current Consumption (amps x #ch)
5.5 A x 4-Channel - 4 Ohm,8.5 A x 2-Channel - 4 Ohm
|
Continuous-Power-Output
40 W x 4-Channel - 4 Ohm,65 W x 4-Channel - 2 Ohm,130 W x 2-Channel - 4 Ohm Bridged
|
Crossover Network Channel
LPF - A/B Ch - 80 Hz,HPF - A Ch - 40 Hz to 500Hz,HPF - B Ch - 80Hz
|
Crossover Network Channel Slope
-12db/oct (A/B CH)
|
Crossover Network Subwoofer Channel
LPF - 80 Hz
|
Crossover Network Subwoofer Slope
-12db/oct (A/B CH)
|
Frequency Response Channel
10Hz to 70kHz (+0dB,-3dB) A/B Ch
|
Frequency Response - Sub Channel
10Hz to 70kHz (+0dB,-3dB)
|
Fuse Rating
30 A x 1
|
Maximum Power Output
80 W x 4-Channel (4 Ohm),130 W x 4-Channel (2 Ohm),520 W (4 Ohm Bridged)
|
RCA Inputs
4-Channel
|
Signal to Noise
78 dBA (Reference: 1 W into 4 ohm)
|
Speaker Line input Sensor
Yes
|